Buy TEIN STECH Here: TEIN STech

One of the most common mods you can do to your Honda Civic is to lower it. This not only improves the looks dramatically, but it also helps with handling, braking, and overall enjoyability of the car to make it perform better. With the Honda Civic being such a popular car to modify, there are so many choices in lowering springs. One of our favorite lowering springs is the TEIN STech.

One of the things we like the most about the TEIN STech lowering springs is that you can retain good ride quality with your Honda Civic, even if you have an engine swap and the engine might be heavier than your stock engine. The Honda Civic TEIN STech lowering springs typically lower your Honda Civic about 1.5 inches, but range depending on the year of your Civic and also what trim it is: EX, Si, DX, LX etc. Many of our customers ask us if they need performance shocks to go along with their TEIN STech’s. It really depends on if your stock shocks are in good shape. Lowering your Civic will make your stock shocks wear faster as they are not designed to support a lowered car or lowering springs that have a higher spring rate. If you are looking for a good shock, we recommend either the adjustable Tokico Illumina Shocks or the Tokico HP Shocks. Both of these will be a great compliment to the TEIN STech springs. If you want to try and save some money, you can install the TEIN STech springs now, and wait until your stock shocks blow, and replace them at that time. If you do the work yourself, it won’t cost you anything except for time, but if you pay a shop to install these then it will cost you later to do them at seperate times. Please also be aware that it’s dangerous to drive with blown shocks.

For those who want to install the TEIN STech springs yourself, the install on a Honda Civic is very straightforward, and can be done in a few hours with hand tools. We recommend using a spring compressor which you can rent at a local auto parts store. Besides the spring compressor there is really not much to it besides removing the stock assembly, and replacing the springs. For those of you who want to ensure your tires last, we recommend getting a Honda Civic Eibach Camber Kit. The camber kit will help with handling even more as it would allow your lowered Civic to have the most contact patch possible between the tires and the road.

The TEIN Part numbers below have the car’s chassis code listed next to them. This code refers to the hatchback, sedan or coupe. Usually, for the Civic, you will see the part number for the civic, hatch or coupe is usually the same. Please verify the part numbers before ordering. Ride quality will remain the same with all of the various trims, but if your car is lightened, the ride will be stiffer due to less weight. Typically, the TEIN STech springs offer one of the best ride’s of any Honda Civic Lowering Spring.

For the Honda Civic, the TEIN STech Lowering Springs are available for most of the years and trim levels. Below are the part numbers and information for placing an order.

SKA36-AUB00 Honda Civic (1989-1991) ED8
The TEIN SKA36-AUB00 lowers the car 1.6 in the front and 1.5 in the rear.

SKA36-AUB00 Honda Civic (1989-1991) ED9
The TEIN SKA36-AUB00 lowers the car 1.6 in the front and 1.5 in the rear.

SKA36-AUB00 Honda Civic (1989-1991) EF9
The TEIN SKA36-AUB00 lowers the car 1.5 in the front and 1.4 in the rear.

SKA00-AUB00 Honda Civic (1992-1995) EH2
The TEIN SKA00-AUB00 lowers the car 1.8 in the front and 1.7 in the rear. For Civics with a Rear Fork

SKA00-AUB00 Honda Civic (1992-1995) EH3 (Si)
The TEIN SKA00-AUB00 lowers the car 1.8 in the front and 1.7 in the rear. For Civics with a Rear Fork

SKA24-AUB00 Honda Civic (1996-2000) EJ6
The TEIN SKA24-AUB00 lowers the car 1.9 in the front and 1.7 in the rear.

SKA24-AUB00 Honda Civic (1996-2000) EJ7
The TEIN SKA24-AUB00 lowers the car 1.9 in the front and 1.7 in the rear.

SKA24-AUB00 Honda Civic (1996-2000) EJ8
The TEIN SKA24-AUB00 lowers the car 1.9 in the front and 1.7 in the rear.

SKA24-AUB00 Honda Civic (1996-2000) EM1 (Si B16A2) Coupe
The TEIN SKA24-AUB00 lowers the car 1.9 in the front and 1.7 in the rear.

SKA22-AUB00 Honda Civic (2001-2005) EM2 (2dr coupe Incl 04+ (exc 4Dr))
The TEIN SKA22-AUB00 lowers the car 1.3 in the front and 1.4 in the rear.

SKA22-AUB00 Honda Civic (2001-2005) ES1 (4dr sedan Incl 04+)
The TEIN SKA22-AUB00 lowers the car 1.3 in the front and 1.4 in the rear.

SKA92-AUB00 Honda Civic (2003-2005) EP3 (3dr Hatch Back Incl 04+)
The TEIN SKA92-AUB00 lowers the car 1.4 in the front and 1.3 in the rear.

SKB14-AUB00 Honda Civic (2006-2009) FA5 (Si 4dr Sedan)
The TEIN SKB14-AUB00 lowers the car 1.4 in the front and 1.3 in the rear.

SKB14-AUB00 Honda Civic (2006-2009) FG1 (2dr Coupe Non Si)
The TEIN SKB14-AUB00 lowers the car 1.1 in the front and 0.8 in the rear.

SKB14-AUB00 Honda Civic (2006-2009) FG2 (Si 2dr Coupe)
The TEIN SKB14-AUB00 lowers the car 1.4 in the front and 1.3 in the rear.

We welcome you to post your reviews and experiences with these TEIN STech Springs below. We also welcome you to post your pictures of your Lowered Honda Civic’s in our forum. Simply click on the link on the top of the site.

Buy TEIN STECH Here: TEIN STech